Bowers and Wilkins 600 series keeps releasing solid performers and one of them is B&W 607, a high-performance bookshelf speaker and is one of the best speakers in its price range. It is a talented all-rounder that lives up to its pedigree and will require an equally talented amplifier to power them. If you are currently out on the market, in search of such an amplifier for your B&W 607 speakers, then you’re in luck and should keep on reading.
We are planning to share with you the best amps which you can opt for and pair them with your Bowers & Wilkins 607 bookshelf speaker. First, we need to find out more about the sonic characteristics of these amazing standmounters. Learn more about their strengths and understand their limitations, from there picking the right amplifiers to match the 607 speakers will be a lot easier.
Table of Contents
Sonic Characteristics and Limitations of Bowers and Wilkins 607
The Bowers & Wilkins 607 has that very clean look to it, probably because they dropped the striking yellow midrange driver to a shiny silver 5 inch (125mm) Continuum cone bass/midrange drive unit. The 1 inch (25mm) Decoupled Double Dome aluminum tweeter is nested above the midrange unit, both drivers are aesthetically matched. If you are wondering where’s the B&W Flowport, it is situated at the back of the speaker cabinet. The bass port may need to be plugged with a foam port plug if you are planning to place them near to walls. This will help tame down the bass response. The overall visual appeal of the B&W 607 speaker looks minimalistic and stylish, will fit right into most homes, and looks good beside most amplifiers. Depending on the cabinet color/finish, you may even want to take off the speaker grille permanently.
The frequency response of the B&W 607 is really impressive for such a compact size bookshelf speaker, it is 52Hz-28kHz (±3dB), which is quite a deep bass extension for a speaker of this size. The speaker sensitivity is a bummer though, it is only 84dBs which is very low. The nominal impedance is 8 Ohms and the minimum is down to about 3.7 Ohms. This is not really an efficient speaker and will require high power to reach loud volumes. The recommended amplifier power is between 30-100 Watts and it will be wise to get an amp that has high power output. Integrated a powered subwoofer will help and ease the load off from your amplifier if is not high powered.
They are an exciting pair of bookshelf speakers that are forward-sounding and very entertaining. The Bowers & Wilkins 607 main focus is to provide you with an engaging music delivery where you will just want to listen to your favorite tunes and forget about everything. The lively music presentation and the crisp highs, not to mention, the amazing clarity of the sound reproduction sure took our attention no matter what music we feed to these speakers. The B&W 607 reproduces rich detailed sound but it could be better if the lower mids are a bit clearer.
More Details at Amazon – Bowers & Wilkins 607
The B&W 607 fulfills its function of reproducing bass that is deep and a scale that rivals other compact bookshelf speakers. The low ends have weight but lack a bit of richness and detail. This downside may have slightly interfered with the rest of the frequencies. Adding a subwoofer into the mix would significantly improve the bass performance, and open up the Bowers and Wilkins 607 speakers. This might improve the overall clarity and allow the speakers to reveal more musical details.
The enthusiasm of these standmounters is really strong with this one, they never cease to fail to strike a chord and we just keep feeding them with more of our favorite tunes. The soundstage and imaging are good as well, not to mention, the timing is snappy and with precision. They probably sound their best in small listening rooms or nearfield listening. Put them too far and the liveliness of your room may give them more energy which may lead to a downgrade in sound quality.
At high volumes, the B&W 607 could sound a little too harsh but it will sound great for listeners who love the bright-sounding audio systems. They are indeed a talented all-rounder and will do well in various setups. As mentioned, a subwoofer will do them good and should remain as an option. We have what we need, and it is time to list out the best amplifiers that you can match with your B&W 607 speakers.
B&W 607 Specifications
- Speaker Type: 2-way rear-firing bass port (Flowport)
- Drive Units: 1 inch (25mm) Decoupled Double Dome aluminum tweeter, 5 inch (125mm) Continuum cone bass/midrange drive unit
- Frequency Response (±3dB): 52Hz-28kHz
- Recommended amplifier power: 30-100 Watts
- Nominal Impedance: 8 Ohms (min. 3.7 Ohms)
- Sensitivity (2.83V/1m): 84dB
- Dimensions (H x W x D): 300mm x 165mm x 206mm | 11.8″ x 6.5″ x 8.1″
- Weight: 11kg (24.3lbs)
Best Amps to match with B&W 607
The Musical Fidelity M3SI is probably the best integrated amplifier to go with your B&W 607 speakers, it uses a dual-mono amplifier (85 Watts per channel), which provides a cleaner sound quality. The definition of the soundstage is solid even at moderate volume and the stereo imaging is spot on. The clarity throughout the frequency band is class-leading and they are plenty of details being revealed as well. The sound reproduction is never harsh and highs aren’t suppressed, the Musical Fidelity M3SI matches well with the B&W 607 speakers and is definitely worthy of your consideration.
More Details at Amazon – Musical Fidelity M3si
The Yamaha A-S501 is one of the best amplifiers to match the sonic characteristics of B&W 607, as the power output from this amplifier is already more than enough to drive your speakers and there is a dedicated subwoofer output to connect to an active sub. The musicality of the Yamaha A-S501 complements the Bowers and Wilkins 607, providing more transparency, clarity, and tighter control over the low-end frequency reproduction. The liveliness of the overall music delivery will certainly be a treat and we recommend having an audition with them first before making any decisions.
More Details at Amazon – YAMAHA A-S501BL Integrated Stereo Amplifier
Rotel amplifiers usually work very well with Bowers and Wilkins speakers, the Rotel A14MKII is no exception and it is well suited for the B&W 607 standmounters. The A14MKII is an upgrade over its predecessor and as expected this leads to an improvement in its sound quality. This amplifier effortlessly projects a wide and spacious soundstage. It has greater control over the bass reproduction which complements the B&W 607. Furthermore, the Rotel A14MKII energetic performance matches well with B&W 607 enthusiasm, providing you with a very enjoyable music listening experience.
Denon PMA-600NE is one of the best entry-level amplifiers that you can get your hands on and will be an amazing partner for your B&W 607 bookshelf speakers. There is a subwoofer output for you to connect a powered sub and allowing the amplifier to focus its power on reproducing the rest of the sound frequency. At this price point, you not only get a built-in DAC but there is also a moving magnet phono input. Furthermore, Analog Mode can be switched on for a clearer and more detailed analog sound reproduction. The Denon PMA-600NE warm-sounding nature helps smoothen the harshness a little too. This is really a bang for one’s buck integrated amplifier.
More Details at Amazon – Denon PMA-600NE Stereo Integrated Amplifier
The Bowers & Wilkins 607 will be great as desktop speakers, due to their compact size. The NAD D 3045 will be an ideal amplifier choice as it has a built-in DAC and a subwoofer output which is what you need to build a full-range desktop sound system. The clean and neutral sound characteristics of the D 3045 match well with the B&W 607, without losing any of their sonic signatures. The enthusiasm of the B&W 607 speakers also complements the NAD D 3045, providing you a lively music delivery. This combination is worth your while to check them out.
More Info at Amazon – NAD D 3045 HybridDigital DAC/Amplifier
Regards to desktop setup, there is another terrific amplifier choice, the NAD D 3020 V2. It is smaller and more affordable than the NAD D 3045, but the power output is lower. So it is best to integrate an active subwoofer into the mix. For a home theater setup, Denon AV receivers are a good match with the B&W 607 speakers. You should check out Denon AVR-S960H, it is a highly rated AVR. For subwoofers, you might want to check out SVS as they specialize in making high-performance powered subs. You can take a look at the SVS SB-1000 Pro, it is a 12 inch sealed subwoofer with 820+ Watts Peak Power.
More Information at Amazon – Denon AVR-S960H 8K Ultra HD AV Receiver
More Information at Amazon – SVS SB-1000 Pro Subwoofer
To Conclude
These are some of the best amplifiers that you can match with your B&W 607 bookshelf speakers, and you should find time to have an audition with them. If one of the amps listed here belongs to some of the brands you have used before, you might want to hear them out first as they should carry a familiar sound signature that you may have already liked. Feel free to use this list as references or use some of the amps listed as side-by-side comparisons when auditioning other brands/amplifiers.
