The Dynaudio Emit series has made quite a few successful models and they usually come in small sizes, the Dynaudio Emit M10 is one such loudspeaker. It is an award-winning compact-size bookshelf speaker that has garnered praises over the years. It has amazing sound quality and you can get them at an affordable price. The Emit M10 is a talented entry-level loudspeaker and will need an equally talented amplifier to drive them.
If you are searching for a matching amp to pair with the Dynaudio Emit M10 bookshelf speakers, then look no further. We will first learn more about the sonic characteristics of the Emit M10 and finding out their strengths including their limitations if there’re any. Once we have the information, we will start sharing with you the best amplifiers that you can go for, so that you can pick one out of the list to match with your Dynaudio Emit M10.
Table of Contents
Sonic Characteristics and Strengths of Dynaudio Emit M10
They look stylish for a pair of entry-level speakers and leaves a good first impression. The size of the Dynaudio Emit M10 speakers makes them easier to fit nicely into most house interiors and wouldn’t stand out much. Aesthetically matching them with amplifiers will be a piece of cake too since they are quite low profile and won’t overshadow the amp especially with the speaker grille on. The compact size and small footprint make them excellent desktop speakers for your PC, laptop, and Mac. We just need to pair them with the right amplifier that comes with built-in digital to analog converter. There is a rear-firing bass port, so you will still need some distance between the speaker and the rear wall even if you are placing the Emit M10 on your desk. You can also go for matching speaker stands such as the Dynaudio Stand 10.
Dynaudio Emit M10 comes with two drivers, one will be the 28mm soft dome tweeter and the other will be a 140mm MSP woofer. For a speaker this size and an entry-level model to boot, its frequency response is actually really impressive, it is 50Hz-23kHz (+/-3dB). They probably will still need a subwoofer to supplement their bass performance. The speaker sensitivity is only 86dB which is kind of a bummer. The impedance is 6 Ohms that is still okay though. The power handling of the Dynaudio Emit M10 is up to 150 Watts, pretty high for a compact bookshelf speaker at this price point, and more than likely will require high-powered amplifiers to drive them. Since it is an entry-level speaker, we will not be looking at HiFi separates like preamplifier and power amp combo as going this route may cost way more than the speakers themselves.
More Details at Amazon – DYNAUDIO Stand 10 Speaker Stands
The Dynaudio Emit M10 is a revealing speaker and has astonishing clarity, producing the subtlest of musical nuances with crystal clear quality. The massive amount of details that the Emit M10 can dig out is really incredible, every small bit of detail does help to create a convincing soundstage. They would be great as surround speakers too since they have very detailed sound reproduction and should be able to produce the surround effects clearly. The Dynaudio Emit M10 is not able to produce very deep bass prominently though and will definitely need a subwoofer to support their low-end performance in an HT setup.
More Details at Amazon – Dynaudio Emit M10
The midbass is quite punchy and the overall bass performance is taut which matches well with the rest of the frequencies. The agility and accuracy of the Emit M10 speakers are impeccable, able to confidently control the music rhythm, and provide us with a lively presentation of our favorite tunes. Even at high volumes, they are still as agile and precise in handling the music. They can be quite bright sounding and we need to be cautious when pairing with bright sounding amplifiers as it could make the overall sound reproduction overly bright. The energetic sonic performance of the Dynaudio Emit M10 really entertains us and is really impressive at how insightful they are, especially at this price point.
It is very versatile and should do well in most setups whether it is stereo, home theater, multi-channel sound system, etc. It is recommended to include a subwoofer to help with the deep bass reproduction. If you do not wish to get a subwoofer, in this case, you can place the Dynaudio Emit M10 nearer to the walls to slightly improve the bass performance. Since the clarity and transparency are high, it should not affect the overall tonal balance by much. For nearfield listening at moderate volumes, these speakers would do well too. As mentioned earlier, we shouldn’t get an amplifier that might excite their trebles too much, and with all the information gathered right here, it is time to share with you the best amplifiers to match with your Dynaudio Emit M10 bookshelf speakers.
Dynaudio Emit M10 Specifications
- Speaker Type: 2-Way Bass Reflex (Rear-Firing Bass Port)
- Drive Units: 28mm soft dome tweeter, 140mm MSP woofer
- Frequency Response (+/-3dB): 50Hz–23kHz
- IEC power handling: 150 Watts
- Impedance: 6 Ohms
- Sensitivity (2.83V/1m): 86dB
- Dimensions (W x H x D): 170mm x 292mm x 253mm (with feet/grill) | 6.7″ x 11.5″ x 10″ (with feet/grill)
- Weight: 5.6kg (12lbs)
Best Amplifiers to match with Dynaudio Emit M10
Parasound NewClassic 200 is one of the best matching amplifiers to pair with your Dynaudio Emit M10 speakers. The 110 Watts into 4 Ohms power output of the NewClassic 200 is strong enough to drive the Emit M10 with ease. To further improve the bass performance, you can also connect an active sub via the 80Hz low pass subwoofer output. The natural and easy on the ears sounding characteristic of the Parasound NewClassic 200 is a suitable match for the Dynaudio Emit M10. There is plenty of depth in the sound quality of this exceptional integrated amplifier and it is able to project a wide soundstage. At their price range, this amplifier is really worth every penny and you should really check them out.
More Information at Amazon – Parasound NewClassic 200
Due to their compact size, the Dynaudio Emit M10 will be ideal desktop/PC speakers and the NAD D 3045 is one of the best matching amplifiers to pair with. The small footprint of the D 3045 amp allows it to fit nicely on any desktop whether cluttered or cramped. There is a built-in DAC with USB to directly connect your PC/laptop/Mac. The power output of the NAD D 3045 is sufficient to drive Dynaudio Emit M10 and their sonic characteristics are well matched too. We will suggest connecting an active subwoofer to help with easing the load off the amp and improving the overall low-end performance. This digital amplifier is within the price range of the Emit M10 speakers.
More Information at Amazon – NAD D 3045 HybridDigital DAC/Amplifier
The Denon PMA-600NE is one of the finest entry-level integrated amplifiers and is very friendly to our wallets. The power output is decent and we will highly recommend connecting an active subwoofer, allowing the sub to take over the task of producing the bass. By adding an active subwoofer, it will help improve the low-end performance of the sound system which the Dynaudio Emit M10 does lack. The neutral with a bit of warmth sonic characteristic of the PMA-600NE is a suitable match with the Emit M10 speakers as well. The overall sound reproduction of the amplifier is also well-balanced and is loaded with features such as a digital-to-analog converter (192kHz/24-Bit). Well worth the price it is asking for.
More Information at Amazon – Denon PMA-600NE
Denon also makes exceptional AV receivers and the Denon AVR-X3700H is one of the matching AVRs to go with your Dynaudio Emit M10 speakers. Firstly, the AVR-X3700H has the muscle to drive your speakers, it has a power output of 135 Watts into 6 Ohms (2ch driven). The neutral and well-balanced sound quality of the Denon AV receiver is well-match with the Emit M10 speakers as well. This is a 9.2 channel AVR, able to process the latest 3D audio, not to mention, delivering 8K/60Hz cinematic visuals onto your screen. If you also play video games then you will be delighted to know that there are features such as Variable Refresh Rate (VRR), Quick Frame Transport (QFT), etc., to further enhance your gameplay.
More Information at Amazon – Denon AVR-X3700H
If you prefer a 2.1 channel setup that can play back both music and movies with excellent sound quality, then the Marantz NR1200 will be the stereo receiver for you. The Marantz NR1200 is able to process 4K/60Hz video and has the power to drive your Dynaudio Emit M10 speakers. Marantz amplifiers are popular among audiophiles due to their musicality and warmth, which matches well with the Emit M10 sonic characteristic and the speakers will also provide more clarity to the overall sound reproduction. Connect up to 2 active subwoofers and you will have a sound system that could handle most music and movie genres. For listeners who are already in love with the Marantz house sound, you should really audition them.
More Information at Amazon – Marantz NR1200 2-Channel Home Theater Amp
There are other brands of integrated amplifiers that you could go for if you prefer a lively and bright-sounding system. Then you should check out Yamaha A-S701 and Cambridge Audio CXA61. The Yamaha A-S701 is a transparent and musical-sounding amplifier, with the capability of digging out plenty of details. The music presentation of the A-S701 is refined and faithful. As for the Cambridge Audio CXA61, it is more forward-sounding with a bolder presentation of the songs/music. The CXA61 is livelier when it comes to music delivery but does lack behind when it comes to bass reproduction. You can connect an active subwoofer to both of these amps, and they are powerful enough to drive the Dynaudio Emit M10 speakers.
More Information at Amazon – Yamaha A-S701 Integrated Stereo Amplifier
More Information at Amazon – Cambridge Audio CXA61
To Sum It Up
You can still go for HiFi separates if you really want to, we will recommend going with the Parasound NewClassic line. The preamps and power amps are affordable and they even outperform some pricer amps. You should hear the listed amplifiers first before making a decision as your ears are the best judges when it comes to sound quality. Feel free to use this list of amplifiers as references when searching for a matching amp on your own. If you like to, you can even do a side-by-side comparison during the auditions.
