The Sonus Faber Venere 2.5 is a beautiful floor-standing speaker set at a modest price. The Venere 2.5 looks more elegant than its smaller sibling which is the Venere 1.5, a stylish-looking bookshelf speaker and at about half the price. For such a price difference, we expect higher sonic performance from the Sonus Faber Venere 2.5, and to see how good these floor-standers really sound, connecting them to a matching amplifier will be necessary.
To find compatible and matching amplifiers, we will first need to learn more about the Sonus Faber Venere 2.5 speakers. Once we have found out more about their strengths, limitations, and sonic characteristics, we can then share with you a list of the best amplifiers to pair with your Sonus Faber Venere 2.5.
Table of Contents
Sonic Characteristics and Limitations of Sonus Faber Venere 2.5
The Venere 2.5 may be one of the more modestly priced loudspeakers made by Sonus Faber but their visual design sure doesn’t look that way. On the first impression, the Sonus Faber Venere 2.5 gives off that premium confidence and seems to cost more than it should be. It will certainly match aesthetically well with most modern amplifiers. As you take off the speaker grille, you will see a 29mm silk dome tweeter at the top, followed by a 7″ (180mm) midrange Curv cone and a 7″ (180mm) woofer Curv cone. It uses a front reflex port which makes it easier to find a speaker position in your listening room since you can place the Venere 2.5 nearer to the rear walls.
For a floor-standing speaker at this price point, the Sonus Faber Venere 2.5 frequency response is pretty impressive, it is at 40Hz-25kHz and we expect prominent deep bass reproduction from them. The nominal impedance is at 6 Ohms which is still okay. The recommended amplifier power starts from 40 Watts and goes all the way up to 250 Watts, this does indicate that the Venere 2.5 speakers will require high-powered amplifiers to drive them. An AV receiver can be an option especially if you are planning to set up a home theater system.
The Sonus Faber Venere 2.5 has an amazing ability to reproduce beautiful sounding vocals that are filled with emotions and energy. The female vocalists at times sounded ethereal and lively with plenty of distinctions between different vocal ranges. They sound natural and balanced as well, if your favorite tunes are focus mainly on vocals, then the Sonus Faber Venere 2.5 is certainly for you. They have nice dynamics where the instruments are smooth sounding and have intricacies that build up your engagement.
More Details at Amazon – Sonus Faber Venere 2.5 Floorstanding Speaker
The midrange reproduction is really superb and is well supported by the highs, working cohesively together. The bass performance has weight and scale but does lack a bit of agility. It is no doubt powerful and can deliver deep bass frequencies with ease. Still, there are times the low-ends are just lagging behind by a little. The Sonus Faber Venere 2.5 would probably be an excellent pair of front main channel speakers in an HT system, as the midbass performance of the Venere 2.5 can be quite punchy and solid. All in all, the Sonus Faber Venere 2.5 speakers are still more musical sounding.
The stereo imaging of these floor-standing speakers is remarkable too, and they could deliver a large soundstage with depth. If you are planning to use the Venere 2.5 for home theater, you will need an active subwoofer that could reproduce bass prominently below 40Hz (you can set the crossover higher). The overall sound reproduction is neutral and just a tad bright/thin sounding. The Sonus Faber Venere 2.5 are fun to listen to and with their sonic characteristics, they should be able to handle most music genres. We have gathered enough data and it is time for us to share with you a list of the best amplifiers that you can go for and match with the Sonus Faber Venere 2.5 floor-standing speakers.
Sonus Faber Venere 2.5 Specifications
- Speaker Type: 2.5-Way (front vented)
- Drive Units: 29mm Silk Dome Tweeter, 7″ (180mm) Midrange Curv cone, 7″ (180mm) Woofer Curv cone
- Frequency Response: 40Hz–25kHz
- Recommended Amplifier Power: 40-250 Watts
- Nominal Impedance: 6 Ohms
- Sensitivity (2.83V/1m): 89dB
- Dimensions (H x W x D): 1107mm x 340mm x 437mm | 43.5″ x 13.3″ x 17.2″
- Weight: 20kg (44lbs)
Best Amplifiers to match with Sonus Faber Venere 2.5
The Rogue Audio Cronus Magnum II is an amazing valve amplifier and is a suitable match with the Sonus Faber Venere 2.5 with quite similar sonic characteristics. You can push the volume to high levels and the overall sound reproduction will not sound overly bright nor harsh. There is accuracy in the music presentation and midrange delivery is excellent as well. If you are looking for a more full-bodied sound reproduction but without too much color and warmth, the Rogue Audio Cronus Magnum II will be an exemplary valve amp choice for you. If you also use a turntable, then you definitely need to check out this amplifier.
The Rega Elicit-R will be one of the best amplifiers to go for and pair it with your Sonus Faber Venere 2.5 speakers. The Elicit-R has an engaging performance and will deliver a music presentation that is involving. With its remarkable timing and pacing, you will be tapping your toes in no time. This is a musical integrated amplifier that can deliver a huge soundstage and fill it with a massive amount of details, and it doesn’t sound clinical but also doesn’t show mercy to bad recordings. There is precision in its music presentation and there is composure too, if you want a more energetic performance without compromising accuracy then the Rega Elicit-R is an ideal amplifier choice.
More Information at Amazon – Rega Elicit-R Amplifier
Musical Fidelity M6i is a very powerful integrated amplifier, it has a rated power output of 300 Watts per channel into 6 Ohms and could easily drive your Sonus Faber Venere 2.5 floor-standers, unlocking their fullest potentials. The bass performance and control of the M6i amplifier are simply terrific which complements the Venere 2.5 speakers really well. Furthermore, the low-end performance of the Musical Fidelity M6i works hand-in-hand with the rest of the higher frequencies to produce a beautiful and powerful sounding music presentation. This is an outstanding amplifier with exceptional sonic characteristics that are well-matched with the Sonus Faber Venere 2.5 speakers.
More Information at Amazon – Musical Fidelity M6i
The Hegel H190 is probably the best amplifier to match with the Sonus Faber Venere 2.5 speakers and with a power output of 250 Watts into 4 Ohms, this amp can drive the Venere 2.5 speakers with ease. The bass performance of the H190 is wonderfully detailed and rich, it has accurate timing and has the deftness to blend in seamlessly with the other frequencies to produce realistic sounding instruments. The vocals sounded natural and full of details as well. The overall music handling of the Hegel H190 is class-leading at this price range and the treble was never overbearing. This integrated amplifier is definitely worth your time to audition.
For listeners who have a tight budget, the Peachtree Audio Nova150 will be a fantastic choice to pair with your Sonus Faber Venere 2.5 floor-standing speakers. The Nova150’s rated power output per channel is 150W/250W into 8Ω/4Ω which is quite rare and powerful for an integrated amp at this price point. It also comes with an arsenal of features such as a built-in premium DAC ES9018K2M SABRE32, Headphone Amp, Moving Magnet Phono input, HT Bypass, and more. The overall sound reproduction of Peachtree Audio Nova150 is neutral with a hint of warmth, a suitable match to the Sonus Faber Venere 2.5.
More Info at Amazon – Peachtree Audio Nova150
When it comes to home theater AV receivers, we will recommend going with either Denon or Marantz. If music performance is important then the Marantz SR7015 will be an ideal AVR to pair with the Sonus Faber Venere 2.5 speakers. It is a powerful 9.2 channel 8K AVR that is extensively tuned by Marantz sound masters so you can expect high music quality from the SR7015. For a more all-rounded performance, the Denon AVR-X6700H will be the one to go for, it is an award-winning 11.2 channel 8K AV receiver, a worthy match to the Sonus Faber Venere 2.5 speakers. In most HT systems, you will require high-quality active subwoofers and we would suggest that you check out SVS SB-2000 Pro.
More Info at Amazon – Marantz SR7015 AV Receiver
More Info at Amazon – Denon AVR-X6700H AV Receiver
More Info at Amazon – SVS SB-2000 Pro 12″ Sealed Subwoofer
To Conclude
You can also go for HiFi separates, it could be an expensive route to go for but you can fine-tune the sound quality to your liking by combining different HiFi components. The listed amplifiers and AVRs are some of the best, you should take the time and effort to audition them. See if you like what you are hearing and do include the active subs you are using or planning to get during the auditions. You might want to hold the amplifier’s auditions in your own listening room for an even more accurate result.
