The ProAc Tablettes first debut in 1979 and was a major success, after years of improvements and upgrades, you can imagine how much better the latest iteration has become. The 10th generation mini-monitors, ProAc Tablette 10 is the new successor of this legendary series and has taken up a new design that is different from its predecessors. This is a pair of brilliant loudspeakers that will require an equally remarkable amplifier to power them.
Finding a compatible amplifier will not only drive the ProAc Tablette 10 but also make them sound their absolute best. Getting the right amplifiers to match with the Tablette 10 mini-monitors will require further understanding of their sonic strengths and characteristics. Once we have enough data, we can then find and list out the best amplifiers which we can go for and pair them with the ProAc stand-mounters.
Table of Contents
Sonic Characteristics and Merits of ProAc Tablette 10
The greatest change to the ProAc Tablette 10 speaker design will be the removal of the bass port, it is now a sealed speaker which does make it a lot easier to position them in our listening room. As you can place these compact bookshelf speakers nearer to the rear walls and this also makes them an ideal pair of desktop speakers. It uses a 1″ (25mm) ProAc silk dome tweeter and a 5″ (125mm) ProAc mid/bass driver. Without a bass port and with just a 5″ bass driver, we are starting to wonder how proficient will the bass performance of the ProAc Tablette 10 speakers be.
The frequency response is 55Hz-30kHz which is wider and deeper than expected. The nominal impedance of 10 Ohms is simply fantastic. The speaker sensitivity of the ProAc Tablette 10 is 86dB, and the recommended amplifier power starts from a measly 5 Watts and up to 50 Watts. Based on the specs alone, the ProAc Tablette 10 speakers seem to be quite easy to drive, and looking for a matching amplifier with around 50 Watts per channel power output is not difficult. We probably will also need to integrate a powered subwoofer into the sound system.
The bass performance of the ProAc Tablette 10 is incredibly agile and the low ends are tightly delivered as well. There is a lack of weight to the bass and the very low ends are not prominent which is as expected and can be easily solved by adding an active subwoofer into the mix. The stereo imaging on the other hand is really amazing and is highly defined as well. The stereo separations are equally impressive too. The highs are sweet-sounding and always pleasing, never once sounded harsh. You can listen to the ProAc Tablette 10 at high volume levels and won’t feel listeners’ fatigue.
The music presentation is smooth and there is warmth as well, making it easy on our ears. The music delivery is also quite laid back and has enough dynamic swings to not make the overall sound reproduction dull. The vocals sounded realistic and natural as well as the instruments are also authentically reproduced. ProAc Tablette 10 is capable of keeping up with fast pace music and delivering them without feeling strained or muddled. With such pleasing sound quality, the Tablette 10 is definitely an excellent choice to be used as a pair of desktop speakers in a nearfield listening environment.
For bass fanatics, the ProAc Tablette 10 may not be a viable speaker choice unless you include a subwoofer to supplement the bass performance. They are certainly a fine pair of speakers to have if you prefer a more relaxed music listening experience. The music delivery of these mini-monitors is brilliantly refined and is quite revealing too. We also think that they are more suitable for music than belonging in a home theater environment. We have finally gathered enough data, and we can now start listing out the best amplifiers which you can go for, so to pair them with your ProAc Tablette 10 loudspeakers. The selling prices of these amplifiers will also be taken into account and should not exceed the price range of these mini-monitors by much.
ProAc Tablette 10 Specifications
- Speaker Type: 2-Way (Sealed)
- Drive Units: 1″ (25mm) ProAc silk dome tweeter, 5″ (125mm) ProAc mid/bass driver
- Frequency Response: 55Hz-30kHz
- Recommended Amplifier Power: 5-50 Watts
- Nominal Impedance: 10 Ohms
- Sensitivity (1w/1m): 86dB
- Dimensions (H x W x D): 305mm x 191mm x 159mm | 12″ x 7.5″ x 6.3″
- Weight: 11kg (24lbs) per pair
Best Amplifiers to match with ProAc Tablette 10
The Rogue Audio Sphinx is one of the best amplifiers to match with your ProAc Tablette 10 mini-monitors. It is a hybrid design integrated amplifier with more than enough power to drive your Tablette 10 which is rated at 100 Watts per channel into 8 Ohm. The Sphinx will be an excellent choice for turntable users, thanks to its high-quality passive RIAA phono stage. It is a musical-sounding amplifier with transparent sound reproduction, delivering an exciting music presentation. You can also use the Rogue Audio Sphinx tube-driven active outputs for your subwoofer and improve the overall bass performance.
More Details at Amazon – Rogue Audio Sphinx Hybrid Integrated Amp
The NAD D 3045 will be one of the best amplifiers to go for if you are planning to set up a stereo desktop sound system. The D 3045 is compact and has a really small footprint due to the way you can place the small integrated amplifier in an upright position. It has the muscles to drive the ProAc Tablette 10 speakers and there are loads of features been built into the amp such as a DAC with USB input, Bluetooth for music streaming, subwoofer output, and many more. The neutrality of the NAD D 3045 is a suitable match to your ProAc Tablette 10 as it does not add brightness to the overall sound reproduction.
More Details at Amazon – NAD D3045 integrated amp
Marantz PM8006 will be an ideal choice if you prefer more warmth and smoother overall sound reproduction for even more pleasing sound quality. With the amplifier’s rated power output of 70 Watts per channel into 8 Ohms, the PM8006 is sufficient to drive your ProAc Tablette 10 stand-mounters. For vinyl records enthusiasts, you will be delighted to know there is an exemplary Marantz Musical Phono EQ stage, and combining its HDAM technology with JFETs, the Marantz PM8006 delivers an improved overall sonic purity. You will get to enjoy a relaxing evening of music listening sessions with this pairing.
More Details at Amazon – Marantz PM8006 with Phono-EQ for Vinyl Playback
The Rega Brio is another amazing compact integrated amplifier and has won multiple awards over the years due to its musicality and exceptional sonic delivery. One of the best amplifiers at its price range, the Rega Brio has impressive agility and provides a punchy performance that will leave your feet tapping throughout the music listening session. Brio’s dynamic and rhythmic music handling really provided us with a very entertaining sonic delivery without compromising the accuracy and details. It is also capable of driving the ProAc Tablette 10 speakers with sufficient power.
More Details at Amazon – Rega Brio – Black
An award-winning integrated amplifier, the Naim Nait 5si is a fine choice for your ProAc Tablette 10 bookshelf speakers. It has the power to drive the Tablette 10 but more importantly the sonic characteristics to match. The Nait 5si amplifier is capable of delivering a powerful and large-scale sound without losing its composure, not to mention, there is refinement as well. With the dynamic swings, precise stereo imaging, and punchy performance, it is an incredible amplifier that can deliver an exciting music presentation. It will also be a fantastic amplifier partner for your ProAc Tablette 10 loudspeakers.
If you are interested in adding a subwoofer into the mix then the ProAc Response ER1 will be a matching sub to pair with your ProAc Tablette 10 speakers. Since they are both from the same brand, they should share similar sound signatures which allows them to deliver a seamless and cohesive overall sound reproduction. Another brilliant subwoofer to check out will be the Rythmik Audio F12, it is an audiophile sealed sub that is excellent when it comes to music performance. For a more affordable option, the SVS SB-1000 Pro will be a great choice and a powerful sealed subwoofer to boot.
More Details at Amazon – SVS SB-1000 Pro Subwoofer (Black Ash)
To Sum It Up
Tube amplifiers will match well with the ProAc Tablette 10 mini-monitors too and we suggest arranging an audition to hear them out first before seriously considering. The same goes for the mentioned amplifiers here, they may be some of the best in their price category but it is still wise to listen to them and see if you like what you are hearing before making your final decision. You should also include the potential subwoofers that you are planning to get while auditioning the amplifiers.
