The Dynaudio Evoke 10 is another amazing compact bookshelf speaker that possesses remarkable sonic performance and high sound quality at their price range. The Evoke series is quite popular among audiophiles, with many of their models getting praised by critics and the small stand-mounter Evoke 10 is definitely one of them. Are you an owner of the Dynaudio Evoke 10 currently searching for a matching amplifier and if you answered yes or soon-to-be, then please continue to read on.
There are plenty of amplifiers out there on the market but picking the right one will require further understanding of the Dynaudio Evoke 10. By learning more about their strengths and sonic characteristics, finding the matching amplifier will become easy. And also you may not need to invest too much as well. We will be listing out the best matching amplifiers with their price range as close to the Dynaudio Evoke 10 speakers, right after we have gathered enough data about them first.
Table of Contents
Sonic Characteristics and Merits of Dynaudio Evoke 10
The Evoke 10 uses a brand new 28mm Cerotar tweeter with Hexis inner dome and below it will be the new Esotec+ woofer (140mm). The bookshelf speaker is slim and has stylish curves which reminded us of their new Contour series. The speaker design has that mix of a conservative, traditional and minimalistic look to it which will look fantastic in homes. With four cabinet finishes to choose from, it will make them easier to fit right in, not to mention, aesthetically match with most amplifiers currently out on the market. The Dynaudio Evoke 10 is bass reflex with the port located at the back of the speaker cabinet. It is recommended to have a minimum distance of 50cm away from any walls.
More Details at Amazon – Dynaudio Evoke 10 Bookshelf Speakers
These are compact size bookshelf speakers and their frequency response of 47Hz-23kHz makes them rather impressive, as they seem to be able to dig deep into the bass extension. How well they can deliver the deep bass is another story though. The speaker sensitivity of Dynaudio Evoke 10 is very low, it is only 84dB and the impedance of 6 Ohms is not helping the situation. This means they really need high-powered amplifiers to drive them so that they could sing at high volumes. The power handling of these stand-mounters is up to 160 Watts, and we should get amps that could reach as close to it as possible, but without investing too much.
The Dynaudio Evoke 10 is surprisingly smooth sounding when compared to other Dynaudio speakers but it is still highly defined and very detailed. The overall delivery sounded natural and smooth, it is very balanced with the instruments sounding realistic. The vocals whether male or female, both sounded natural as well. The transparency of the Dynaudio Evoke 10 is simply incredible. The bass performance is good, with the agility you will expect from a small bookshelf speaker, and they are delivered with tautness. Still, there is a lack of weight and authority which adding an active subwoofer will do the trick.
They can reach deep and produce the bass but are not as prominent that we would want. It is enough to provide us with the presence of a large and spacious soundstage. The stereo imaging of Evoke 10 speakers is impeccable and with great precision. We do detect a hint of colorations of the Dynaudio Evoke 10 full-bodied sound reproduction which also provided a bit of warmth and energy to the overall music presentation. All in all, these bookshelf speakers are very neutral, and depending on the pairing components as well as the music, they might sound brighter or warmer.
On their own, the Dynaudio Evoke 10 could handle most music genres but when it comes to bass-heavy soundtracks and/or music with very deep bass notes, it is recommended to add a subwoofer into the mix. It should significantly improve the bass performance of your sound system. We love how transparent the Dynaudio Evoke 10 sounds and the pacing of the speakers is remarkable as well. It is a pair of talented stand-mounters that will perform well in both a stereo or a multi-channel system setup. What they need right now, is a matching amplifier and we are going to list out the best amplifiers to go for.
Dynaudio Evoke 10 Specifications
- Speaker Type: 2-Way Bass Reflex (Rear-Firing Bass Port)
- Drive Units: 28mm Cerotar tweeter with Hexis, 140mm Esotec+ woofer
- Frequency Response (+/-3dB): 47Hz–23kHz
- IEC power handling: 160 Watts
- Impedance: 6 Ohms
- Sensitivity (2.83V/1m): 84dB
- Dimensions (W x H x D): 180mm x 315mm x 277mm (with feet/grill) | 7.1″ x 12.4″ x 10.9″ (with feet/grill)
- Weight: 6.7kg (14.8lbs)
Best Amplifiers to match with Dynaudio Evoke 10
When it comes to the high power outputs at a reasonable cost, the Peachtree Audio Nova150 will be one of the best amplifiers to go for. It is quite rare to find an integrated amplifier with 150/250 Watts per channel into 8/4 Ohms at this price point, furthermore, with this amount of power, the Nova150 can easily drive the Dynaudio Evoke 10 speakers. The preamplifier and Class D (ICEPower) amplification deliver a clean and smooth music presentation with a touch of warmth. It is also a transparent amp which is a similar characteristic to the Dynaudio Evoke 10 bookshelf speaker. At this price point, the Peachtree Audio Nova150 also comes with a plethora of features, simply bang for the buck.
More Info at Amazon – Peachtree Audio Nova150 Integrated Amplifier with DAC
Marantz PM8006 is one of the finest amplifiers to go for and has the muscles to drive the Dynaudio Evoke 10 speakers. This integrated amplifier is also great for turntable users, thanks to the high-quality Marantz Musical Phono EQ stage. The Marantz proprietary HDAM-SA3 circuits provide a smooth and warm sound reproduction which not only makes PM8006 even more suitable for vinyl sources but also well-match with the Evoke 10 speakers. Furthermore, it delivers a wide and deep soundstage, complementing the bookshelf speakers really well. The coveted Marantz house sound has captured the hearts of many audiophiles, go have a listen and see if you like what you hear.
More Info at Amazon – Marantz PM8006 Amplifier
The Yamaha A-S801 is another amazing amplifier that you should check out, as it is well matched to your Dynaudio Evoke 10. The transparency and clarity of this integrated amp are astonishing, every musical nuance is been produced in crystal clear quality. The A-S801 is able to deliver a very accurate presentation of your favorite tunes and it is revealing as well, but never sound clinical. It also has the power to easily drive your Dynaudio Evoke 10 loudspeakers. If you want to enhance the overall bass performance, you can always connect an active sub via the dedicated subwoofer output. The sound quality may be too bright for some listeners and we will recommend having an audition with them first before making a decision.
More Info at Amazon – Yamaha A-S801 Integrated Stereo Amplifier (Silver)
If music listening and watching movies at home are your main entertainments, the Marantz NR1200 will be the ideal amplifier for you. It is a stereo receiver with 2 dedicated subwoofer outputs, allowing you to connect up to 2 active subs. These subwoofers will help provide an exhilarating home cinematic experience with their thunderous bass and deep rumbles which the Dynaudio Evoke 10 speakers are unable to provide. The Marantz NR1200 also has 4K/60Hz video processing. Furthermore, the NR1200 is also exceptional when it comes to music playbacks, it is extensively tuned by Marantz sound masters so you can be assured of the sound quality. At this price point, you are really getting a lot of features and sonic performance.
More Info at Amazon – Marantz NR1200 – Wi-Fi, Bluetooth, Heos + Alexa
If you are having space constraints, a small-sized amplifier will be an ideal choice for you. The Wyred 4 Sound mINT has a small footprint and is compact in size, more importantly, it has the power to drive your Dynaudio Evoke 10 with ease. This mini-amp also comes with loads of useful features such as a built-in ESS Sabre D/A converter, headphone amp, Home Theater bypass, and more. There is also plenty of connectivity including a 24/96kHz USB input. The mINT delivers a very detailed, clean, and realistic sound reproduction of the musical instruments. It also controls the music transients expertly, the Wyred 4 Sound mINT is definitely a worthy amplifier for your Dynaudio Evoke 10 speakers. It is worth the time and effort to have an audition with them.
More Info at Amazon – Wyred 4 Sound Mint with Built-in Headphone Amplifier and ESS Sabre DAC
For HiFi separates, such as a preamplifier and power amplifier combo, the Wyred 4 Sound has them as well and they are all sanely priced. In the preamp section, you can check out Wyred 4 Sound mPRE which also comes with a built-in DAC. In the power amp section, the Wyred 4 Sound ST-500 MkII stereo amplifier has more than enough power to really drive your Dynaudio Evoke 10 speakers. If you prefer Class AB amplification, you can check out the Parasound Halo line of preamps and power amps. Emotiva power amplifiers will be an excellent choice for listeners who have tight budgets. You can add in an additional subwoofer to improve the overall bass performance of your sound system. The Dynaudio Sub 6 will be a good start but if you want more performance for the money, you should check out SVS subwoofers.
More Info at Amazon – Wyred 4 Sound mPRE – Premium Audiophile Stereo Preamplifier
More Info at Amazon – Wyred 4 Sound ST-500 mkII Stereo Amplifier
To Conclude
These are the best matching amplifiers that you can go for, still, we will recommend to audition them first and hear them out. See if you like the sound quality they produce and confirm your interest. Do include the potential subwoofers during the auditioning though and of course along with your Dynaudio Evoke 10 speakers. The list of amps can be used as references when searching for other amplifiers which are not listed here. You might want to at least demo one from the list first before using it as a reference.
