The Elac DBR62 is the bookshelf speaker model of the coveted Debut Reference line which has an improved high-frequency response with a more open grill design. When compared to Elac’s entry-level Debut series stand-mounters, the Elac DBR62 looks more visually pleasing and should have a slightly better sonic performance. If you are a proud owner of the Elac DBR62 bookshelf speakers and are currently searching for a matching amplifier then please look no further.
We are planning to find the right amplifiers that will match well with the Elac DBR62 speakers by first learning more about their strengths, limitations, and sonic characteristics. Once we have managed to gather all that data, we can then start listing out the best amplifiers which you can go for and pair them with your Elac DBR62 bookshelf speakers.
Table of Contents
Sonic Characteristics and Limitations of Elac DBR62
The most iconic visual feature of the Elac DBR62 stand-mounter will be the 1″ (25mm) Cloth Dome tweeter with a new waveguide and open grill design. Below the tweeter, you will spot a 6.5″ (165mm) Aramid Fiber woofer, followed by a front-firing bass slot vent. With the dual flared slot vent been located at the front of the speaker cabinet, this will allow the users to place the DBR62 speakers nearer to the rear walls. We prefer the speaker grille off as it looks more elegant and stylish, giving off a premium feel. Aesthetically, they will certainly match well with most modern amplifiers.
The speaker sensitivity is pretty low which is at 86dB and with a nominal impedance of 6 Ohms, you will need an amplifier that has high power outputs to drive the Elac DBR62 to high volume levels. The maximum power input of the DBR62 is 120 Watts and you might want to go with amplifiers that have around 70 Watts per channel (stereo) power output. The frequency response of the Elac DBR62 is 44Hz-35kHz which is an impressive frequency range for a bookshelf speaker at this price point. There is a probability that you might need to add an active subwoofer into the mix.
More Details at Amazon – ELAC Debut Reference DBR62
There is a high level of insight and clarity, the impressive amount of music details that the Elac DBR62 speakers can produce is astonishing. The revealing nature is backed by musical refinement which helps to soften bad recordings and don’t make these speakers sound clinical. The treble can be too bright sounding for some listeners but it doesn’t reach a level of harshness which can easily fatigue one’s ears. The bass performance is taut and detailed but can be a little lightweight. Still, the low-ends blend in nicely with the rest of the higher frequencies where the bass doesn’t cloud or overwhelms them.
The midrange reproduction is probably the Elac DBR62 strongest asset, it has a clean and clear delivery. The vocals sounded natural and are intricately detailed too. The mids are well textured and have plenty of subtle nuances to boot but can be a tad polite at times. The overall sound reproduction is rather relaxed and the speakers do lack a certain level of enthusiasm, the soundstage is rich with details but is not as involving as it should be. There is no doubt the music is accurately presented though. It also feels that mixing in an active sub might help improve the impact and engagement.
The Elac DBR62 is revealing and transparent, the overall sound reproduction is neutral and can be quite bright for some listeners. There is a lack of enthusiasm and is unable to deliver an energetic musical performance but when it comes to vocal reproduction it is rather superb. With a high-quality subwoofer supplementing the bass, the Elac Debut Reference DBR62 will work well in a home theater setup as they are able to produce loads of details. With the information we have gathered, we can now start listing out the best amplifiers to pair with the Elac DBR62 bookshelf speakers. The selected amps will be quite close to the price point of the Elac Debut Reference speakers too.
Elac DBR62 Specifications
- Speaker Type: 2-Way (Dual Flared Slot Vent Front-Firing)
- Drive Units: 1″ (25mm) Cloth Dome tweeter, 6.5″ (165mm) Aramid Fiber woofer
- Frequency Range: 44Hz–35kHz
- Recommended Amplifier Power: 120 Watts
- Nominal Impedance: 6 Ohms
- Sensitivity (2.83v/1m): 86dB
- Dimensions (W x H x D): 208mm x 358mm x 274mm | 8.2″ x 14.1″ x 10.8″
- Weight: 8.2kg (18lbs)
Best Amplifiers to match with Elac DBR62
The Denon PMA-800NE will be one of the best amplifiers to pair with the Elac DBR62, they have an almost similar price range and there are a plethora of features to boot. If you are a turntable user then you will be delighted to know that there is a built-in Phono preamplifier and you can activate Analog Mode for higher clarity with a bit more detailed sound reproduction from your analog sources. The built-in DAC will be handy too as you can play high-resolution audio files (up to 192kHz/24bit). The Denon PMA-800NE neutral-sounding character with a hint of warmth helps to ease the edges a little.
More Details at Amazon – Denon PMA-800NE Amplifier| Built-In Phono Pre-Amp
The Cambridge Audio CXA61 is one of the best amplifiers to match with your Elac DBR62 as it has an energetic performance that will breathe more life into your music. The CXA61 knows how to deliver an engaging music presentation that complements the DBR62 speakers really well. The integrated amplifier does not compromise the transparency of the overall sound reproduction and provides a punchier musical performance. There is also a dedicated subwoofer output to integrate an active sub so to improve the overall bass performance and adding more weight to the sound quality.
More Details at Amazon – Cambridge Audio CXA61 – Built-in DAC
The Parasound NewClassic 200 is one of the most powerful integrated amplifiers at their price range, it has a power output of up to 125 Watts per channel into 8/4 Ohms and can easily make your Elac DBR62 speakers sing. The warm and sweet-sounding nature of the NewClassic 200 is a suitable match with the DBR62 speakers as well as it doesn’t add more brightness to the overall sound reproduction. The dedicated subwoofer output with an 80Hz low pass will come in handy when integrating a powered sub. There is also plenty of depth in the music delivery and you should definitely take a chance to audition them.
More Details at Amazon – Parasound NewClassic 200
For a more lively music performance with an impeccable sense of timing and pacing, the Rega Elex-R will be the integrated amplifier to go for and pair up with your Elac DBR62 bookshelf speakers. The agility of the Elex-R is remarkable too, it graces through the music with confidence and rhythm which will make you want to stand up and start dancing. Other than the energy it brings to the table, the overall sound reproduction is filled with intricacies and texture. We will suggest that you hear them out first before making the final decision as it can sound overly bright for some listeners.
More Details at Amazon – Rega Elex-R Amplifier
As mentioned earlier, the Elac DBR62 speakers can perform well in a home theater system setup and the Marantz SR6015 will make a great AVR partner to pair with. For an AV receiver, the SR6015 has remarkable musicality and refinement with a touch of warmth which helps to ease the brightness of the DBR62 speakers by a little. The bass performance of the Marantz SR6015 helps to make the overall sonic reproduction sound fuller. It is one of the latest AV receivers that is designed by Marantz and it could process 8K UHD video signals, providing you with beautiful cinematic visuals. With a rated power output of 150 Watts into 6 Ohms (2 channels driven), it also has the muscles to drive the Elac DBR62 speakers with ease.
More Information at Amazon – Marantz SR6015
Another AVR brand you can check out will be Denon as their AVRs’ overall sonic characteristics are neutral with a hint of warmth and have full-bodied sound quality, easier to match with the Elac DBR62 speakers. Other brands of integrated amplifiers to check out will be Audiolab, Yamaha, and PS Audio. For subwoofers, you can either go with a matching Elac sub or go with brands that specialize in making high-quality active subwoofers such as SVS, Rythmik Audio, HSU Research, etc. The mentioned subwoofer brands have modestly priced subs like the SVS PB-1000 Pro and you might want to start with that as it is a solid performer for the price.
More Information at Amazon – SVS PB-1000 Pro Subwoofer
To Conclude
We highly recommend auditioning these amplifiers before making a decision. You will need to judge the sound quality with your own ears and see if you like what you are hearing. You can also use some of the amps as references when comparing with other amplifiers that are not listed here. We will suggest you listen to the amplifiers first before using them as a reference so that you can get a more accurate comparison. The listed amplifiers are quite near to the price range of the Elac DBR62 speakers excluding the Marantz SR6015 AVR.
