The people at Q Acoustics have made another award-winning loudspeaker. We are not sure how they are able to keep churning out star after star but we are definitely grateful for them. If we were to nitpick this Concept Speaker series, it would be that they are not as affordable as their predecessors.
Q Acoustics Concept 50 is a high-quality floor-standing speaker nonetheless and will require an amplifier of equal caliber to partner with. Let us learn more about the Concept 50 loudspeakers.
Table of Contents
The Characteristics of Q Acoustics Concept 50
They are quite a small pair of floor-standing speakers but the Q Acoustics Concept 50 is still rather capable of digging deep into the bass extension, down to 42Hz (-6dB) to be exact. This is not bad for a speaker with two 5″ (125mm) bass driver units. In the middle of the bass drivers, will be slightly smaller than the usual 0.9″ (25mm) treble unit. The bass port is located at the rear, so please make sure you have sufficient space between the speaker and the wall. If not, the bass reproduction may get too reinforced.
The recommended amplifier power is between 25 Watts to 150 Watts. With a speaker sensitivity of 90.5 dB, we don’t really need to focus on getting a very high-powered amplifier to drive the Q Acoustics Concept 50. Still, if you are planning to play music at a loud volume, it is wise to get an amplifier with substantial power. The nominal impedance of the Q Acoustics Concept 50 speakers is at 6 Ohms and with a minimum of 3.6 Ohms.
Q Acoustics Concept 50 bass performance is tight and doesn’t sound bloated. The bass delivery is agile as well and can keep pace with most music. There is decent weight in the low-end and fits nicely with its broad soundstage. The stereo imaging is focused and the separation is good. For listeners who go for bass-heavy soundtracks. You might need a high-quality subwoofer to supplement the low frequency since the subterranean level of bass reproduction is not the Concept 50 floor-standing speakers’ forte.
The Q Acoustics Concept 50 will provide a music presentation with clarity and you will be getting plenty of sonic performance for the price. The soundstage is spacious and the imaging is accurate. If you are planning to own a pair of them, they are certainly worth your time for an audition. We have prepared a list of the best amplifiers to match your Q Acoustics Concept 50 loudspeakers. You can take a look at them below.
The Best Amplifiers for Q Acoustics Concept 50
The Cambridge Audio Azur 851A is one of the best amplifiers to match your Q Acoustics Concept 50 speakers. This Cambridge Audio integrated amplifier has no issue driving your Concept 50 floor-standing speakers. With up to 200 Watts RMS power into 4 Ohms, you can play your music at high volume levels. Furthermore, the Cambridge Audio Azur 851A has a powerful music presentation which helps to add a bit more excitement when playing your favorite songs.
The Marantz Model 30 is another powerful integrated amplifier that can drive your Q Acoustics Concept 50 speakers without breaking a sweat. It has a rated output power of 100 Watts into 8 Ohms and doubles it to 200 Watts into 4 Ohms. The overall sound reproduction is rather lively and has a touch of warmth which makes listening to the amp for long hours easy on the ears. Marantz Model 30 has amazing accuracy and also has the articulation to play most genres of music. The price point of this Marantz amplifier is close to Q Acoustics Concept 50.
Rega Elex-R like the Q Acoustics Concept 50 is an award-winning HiFi product. The Rega Elex-R may not be as powerful as the above amplifiers but it is more than sufficient to drive the Q Acoustics Concept 50 speakers. It also helps to improve the agility and articulation of the overall sound reproduction when matched to your Q Acoustics Concept 50 floor-standing speakers. The exciting music presentation of the Rega Elex-R doesn’t jeopardize the precision.
If you are still looking for an integrated amplifier that can drive the Q Acoustics Concept 50 speakers with ease and has room to spare. The Parasound Hint 6 is an exceptional amplifier choice to go for. With both channels driven, the Hint 6 amplifier is capable of driving up to 270 Watts RMS into 4 Ohms. It is not just about power when it comes to Parasound Hint 6. There is a lively energy with this Parasound amplifier, and the engaging music delivery will leave you wanting for more.
Cambridge Audio CXA81 is an amazing amplifier to go for and to partner with the Q Acoustics Concept 50 floor-standing speakers. It is an amp that has garnered many accolades over the years and it doesn’t break your wallet to own one. If you want a bolder presentation of your favorite music, the Cambridge Audio CXA81 will be the ideal choice for you. The Cambridge Audio doesn’t have high amplifier power but it is good enough to drive your Q Acoustics Concept 50 speakers.
The Denon PMA-1700NE is one of the best amplifiers to partner up with your Q Acoustics Concept 50. This is a Swiss army knife of an amplifier, packing a plethora of features such as a built-in Phono stage, USB DAC, and more. Another feature worth mentioning is the Pure Direct mode. When this feature is switched on, the Denon PMA-1700NE can provide a cleaner and more accurate music presentation. It also has enough amplifier power to drive the Q Acoustics Concept 50 floor-standing speakers.
To Sum It Up
The amplifiers listed here are all worthy of your consideration and will match well with your Q Acoustics Concept 50 floor-standing speakers. You can shortlist a few of these amplifiers for an audition. The auditioning should be together with your Q Acoustics Concept 50 speakers so as to get a more accurate hearing/test result. If it is done inside your own listening room, it would be even better.