Dynaudio high-end speakers are always the ones taking the spotlight but there is one entry-level speaker which took home quite a few prestigious accolades and glory. This will be the award-winning Dynaudio Emit M20, a compact bookshelf speaker that is easy on the wallet but heavy on sonic performance. This talented loudspeaker wouldn’t have done so well without the support of a matching amplifier.
If you are on the lookout for a matching amplifier to pair up with your Dynaudio Emit M20 loudspeakers then don’t go away, for we are planning to show you a list of the best matching amplifiers that you should get. To find the right amps, we will first learn more about this wonderful pair of bookshelf speakers, such as how good they sound, and get to know more about their strengths.
Table of Contents
Sonic Characteristics and Merits of Dynaudio Emit M20
They may be entry-level bookshelf speakers at an affordable price range but they do sure look good. The speaker cabinet design does make them look premium, and even with the speaker grille on, the Dynaudio Emit M20 still looks stylish. Taking off the grille, you will see two drivers fit nicely at the front of the speaker cabinet. There is a 28mm soft dome tweeter and below it, will be a 170mm MSP woofer unit. At the back of the cabinet, you will find a decent-sized bass port which does make us feel you could actually place the Emit M20 closer to the rear walls. The compact size of the bookshelf speakers does make them ideal desktop speakers for your PC or Mac sound system.
The speaker sensitivity is only 86dB which we did expect to be this low. The impedance is at 4 Ohms, with these two specs, it is quite obvious the Dynaudio Emit M20 speakers are difficult to drive. Their peak power handling is 150 Watts and we should get an amplifier that has a power output of at least half of it, also able to drive a 4 Ohms speaker. These requirements do remove quite a number of potential amplifiers from the list. The frequency response is 50Hz-23kHz which is really good. The visual design of the Dynaudio Emit M20 makes it quite easy to match them with most modern amplifiers and aesthetic mismatch shouldn’t be an issue. They should look great in your listening room too.
More Details at Amazon – DYNAUDIO EMIT M20 Monitor Speakers
The Dynaudio Emit M20 is no ordinary bookshelf speaker, the scale of the sound is really impressive especially coming from a compact speaker is considered quite a monumental sonic feat. The low-frequency performance is equally impressive and contributed to how big they sound. The bass is tight and well-controlled but does lack the refinement and could be richer in details though. Still, the Emit M20 is very entertaining to listen to, the bass reproduction matches well with the energetic musical performance. Providing us with plenty of impactful crescendos, not to mention, the Dynaudio Emit M20 punches way above its weight.
The energy and enthusiastic sonic characters of the Emit M20 speakers do not compromise the details. Each music presentation of our favorite tunes is simply engaging, it may not be as faithful but it sure is fun to listen to. The Dynaudio Emit M20 is one of the most lively speakers on the market and yet still sound quite refined, expertly producing each attack with impeccable timing and precision. The bass performance is really incredible, not to mention, it is ample enough to even let us think that maybe these compact bookshelf speakers do not need the support of a subwoofer. Bass fanatics who are looking for a pair of stereo speakers should certainly check out Dynaudio Emit M20.
A subwoofer will be needed for an exhilarating home cinematic experience or for music with plenty of deep bass notes such as movie soundtracks since these speakers will require support after about 60Hz and below. They will make terrific desktop speakers for nearfield listening as well. The highs are mainly smooth sounding but tend to sound a bit bright especially at higher volumes. At this price point, the Dynaudio Emit M20 is quite an awesome all-rounder and well worth the investment. What’s more important is that we really enjoy listening to them. After learning more about the Dynaudio Emit M20 loudspeakers, we can finally decide and list out the best matching amplifiers that we should get. The price range of these matching amplifiers should be as close to the price point of the speakers as possible.
Dynaudio Emit M20 Specifications
- Speaker Type: 2-Way Bass Reflex (Rear-Firing Bass Port)
- Drive Units: 28mm soft dome tweeter, 170mm MSP woofer
- Frequency Response (+/-3dB): 50Hz–23kHz
- IEC power handling: 150 Watts
- Impedance: 4 Ohms
- Sensitivity (2.83V/1m): 86dB
- Dimensions (W x H x D): 215mm x 355mm x 280mm (with feet/grill) | 8.5″ x 14″ x 11″ (with feet/grill)
- Weight: 7.5kg (16lbs)
Best Amplifiers to match with Dynaudio Emit M20
The Marantz PM8006 will be one of the best amplifiers to match with the Dynaudio Emit M20 bookshelf speakers. The power output of the PM8006 is 100 Watts per channel into 4 Ohms which is more than sufficient to drive the Emit M20. Furthermore, this integrated amplifier delivers smooth and warm sound reproduction allowing you to listen to your favorite tunes at high volume without worrying about listener fatigue. For turntable users, you will be delighted to know that this amplifier comes with the Marantz Musical Phono EQ stage, providing you with lower distortion and high sound quality when playing vinyl analog sources. You can also adjust the Bass and Treble settings to tune the overall sound reproduction to your liking.
More Details at Amazon – Marantz PM8006 with and Phono-EQ for Vinyl Playback
If you have a tight budget and are planning to connect an active subwoofer, then perhaps the Denon PMA-600NE will be your best choice. It is a talented entry-level integrated amplifier that comes with a plethora of features to accommodate most modern audiophiles. There is a built-in DAC and comes with Bluetooth connectivity, allowing you to play or stream your digital music files. There is also a MM phono input for you to connect to your turntable, furthermore, using the Analog Mode will further improve the clarity and details of the sound quality from analog sources. The sonic characteristics are quite well matched with the Dynaudio Emit M20 as the PMA-600NE does not add brightness to the overall sound reproduction.
More Details at Amazon – Denon PMA-600NE | Advanced Ultra High Current Power
The Peachtree Audio Nova150 will be a fantastic matching amplifier for your Dynaudio Emit M20 speakers as firstly, the Nova150’s 250 Watts per channel into 4 Ohms power output allows it to drive the Emit M20 speakers without breaking a sweat. Not to mention, this integrated amplifier also comes with loads of premium features such as a high-quality ES9018K2M SABRE32 Reference DAC, internal phono preamp, headphone amp, HT bypass, and more. The preamp section and ICEPower amplification of the Peachtree Audio Nova150 provide accurate, smooth, and pleasing to the ears sound quality which is suitable for Dynaudio Emit M20 sound characteristics. With so much sonic performance and features, the Nova150 amplifier is still so sanely priced and not to forget, the flexibility to connect to your current/future AV receiver.
More Details at Amazon – Peachtree Audio Nova150
For a lively musical delivery, the Cambridge Audio CXA81 with its Class AB amplification of 120W per channel (4 Ohms) is the ideal amplifier choice to match your Dynaudio Emit M20 speakers. There is also a dedicated subwoofer output for you to connect to an active sub for that enhanced low-end oomph. This is an integrated amp that has won awards and is one of the very best in its price range. The music presentation of the Cambridge Audio CXA81 is very detailed, punchy, and powerful. The enthusiasm of this amplifier is quite similar to the Emit M20 but with more clarity and insights. For listeners who are fine with bright sounding systems or want a livelier music presentation, we will recommend you to have a listen with this combination.
More Details at Amazon – Cambridge Audio CXA81 with Bluetooth and Built-in DAC
The Yamaha A-S801 is also one of the best matching amplifiers and is powerful enough to really make your Dynaudio Emit M20 speakers sing. The amount of details that this integrated amplifier can dig out is simply astonishing and the transparency is equally amazing. The music delivery is clean and clear, the neutralness helps to produce a faithful music presentation close to what the musicians have intended for us to hear. It has plenty of insights but never really sounded clinical. The neutral sonic characteristic of the Yamaha A-S801 does have a little brightness to it and matches well with the Emit M20 bookshelf speakers, especially if you are not seeking a smooth and warm sounding system. At this asking price and the exceptional sound quality that comes with it, we would suggest auditioning them as it will be worth your effort.
More Details at Amazon – Yamaha A-S801 Integrated Amplifier
When it comes to home theater system setup, AV receivers made by Marantz and Denon are well suited to your Dynaudio Emit M20 sonic characteristics as they are smooth sounding with a touch of warmth. This helps to ease the harshness at high volumes and the Marantz AV receiver like the SR7015 is great for multi-channel soundtracks. Both brands also have Audyssey which is a room correction technology to help improve the speakers’ sound quality in a given listening room. In an HT setup, you will definitely need to include an active subwoofer. The Dynaudio Sub 3 will be a good choice since it is from the same company and will have a similar signature sound to work cohesively together. It is also a compact size active sub. For more impact and power, you may want to check out Dynaudio Sub 6 instead. The SVS subwoofers are also amazing choices, if your budget is tight, you can go with their SVS PB-1000 ported powered sub.
More Details at Amazon – Marantz SR7015 AV Receiver with Amazon Alexa and HEOS
More Details at Amazon – SVS PB-1000 Subwoofer, 300-Watts RMS, Ported Cabinet
To Conclude
Even though the Dynaudio Emit M20 speakers will scale well with power, we didn’t recommend a preamp and power amp combo as it may cost way beyond the speakers’ price. If you are still interested in HiFi separates, you might want to take a look at Parasound. The listed amplifiers are some of the best to match with Dynaudio Emit M20 bookshelf speakers and are worthy to have an audition with you. Hear them out, shortlist the ones you like, and go for another round of auditioning to finalize the potential matching amplifier. You can also use the demo results to do side-by-side comparisons with other amplifier brands or models that you like.
