Klipsch RF-7 III Amplifier

Klipsch RF-7 III Amplifier

One of the finest speakers from the Klipsch Reference series, the Klipsch RF-7 III is an outstanding flagship floor-standing speaker and they are made to impress. The sheer size alone already gives us the feeling that it can move a lot of air and could easily fill large rooms with music, and we are truthfully expecting that. These tower speakers probably require equally impressive amplifiers to power them so that they can sound their absolute best.

We will be planning to share with you a list of amplifiers that you can go for and so if you are currently on the lookout for a matching amplifier then please sit tight and continue to read this article. We will be sharing crucial information about the Klipsch RF-7 III strengths and its unique sonic characteristics. This information will be very useful when searching for potential amplifiers to match with the RF-7 III floor-standing speakers, so without further ado, let’s start.

Sound Characteristics and Merits of Klipsch RF-7 III

As mentioned earlier, the Klipsch RF-7 III is huge, the towering height and the width of the speaker cabinet do leave quite a first impression. The two 10 inch (250mm) Cerametallic woofers with their striking copper color really grab your attention. After you are awed by the size of the woofers, the next immediate feature you will notice will be the Klipsch signature Tractrix horn with a 1.75 inch (45mm) titanium dome tweeter. When you look at the back RF-7 III speaker cabinet, you will find two rear-firing Tractrix ports. The Klipsch RF-7 III is no doubt meant for large listening rooms and will require sufficient distance between the speakers to the walls.

The size of the drivers is not for show, the Klipsch RF-7 III frequency response is 32Hz-25kHz (±3dB) which is really remarkable for a speaker at this price point. The speaker sensitivity of 100dB is even more astounding, and probably the most efficient speaker at this price range. There’s a high chance that the Klipsch RF-7 III doesn’t need bass support from a subwoofer, if you want more bass, you can just push them nearer to the walls. The power handling is pretty high, the floorstander can handle up to 250 Watts of continuous power output and 1,000 Watts peak. Based on this, they probably need high-power amplifiers in order for them to sound their best. With an 8 Ohms nominal impedance and high sensitivity, the Klipsch RF-7 III is very easy to drive and will work well with low power but pure Class A amplification.

More Details at Amazon – Klipsch RF-7 III Floorstanding Speaker Pair

The transparency and clarity of Klipsch RF-7 III are the best in the Reference series, this tower speaker unravels everything and produces them out in spades. The subtlest of details are delivered with crystal clear quality, every nuance of your music is cleanly produced. The Klipsch RF-7 III is a beast when it comes to loudness, it is powerful and remains undistorted even at very high volumes. The clean-sounding nature and liveliness provide an engaging movie experience, as you brace yourself for the incoming high octane action scenes. Glass shattering, explosions, background ambient effects, and other subtle details, can be heard without trouble.

The amount of air pressure the Klipsch RF-7 III delivers into the room, works great for live performances as well, letting you feel the energy and atmosphere of a live concert. The bass reproduction is taut and agile, not to mention, clean sounding bass. The Klipsch RF-7 III is really capable of producing very deep low frequency but for the deepest of bass (below 40Hz), a subwoofer will be required, it may also help to make the overall bass sound fuller. It does lack refinement and has no mercy on bad recordings since the clarity of these tower speakers is really incredible. To some, it may be a bit too bright sounding.

The Klipsch RF-7 III floor-standing speakers are great for both music and movie playbacks. Due to their sonic characteristics, they are actually very versatile speakers, and matching the right amplifier, can either help to boost the musicality or liveliness of the RF-7 III. In a home theater system, they are definitely meant to be left and right main channel speakers, and connecting to an active subwoofer is recommended. In a 2.0 setup, the Klipsch RF-7 III speakers are definitely sufficient just by themselves. It is time for us to share with you the best amplifiers that you can choose to match with your Klipsch RF-7 III flagship loudspeakers.

Klipsch RF-7 III Specifications

  • Speaker Type: bass-reflex (two rear-firing bass ports)
  • Drive Units: 1.75 inch (45mm) titanium dome tweeter with Tractrix horn, two 10 inch (250mm) Cerametallic woofers
  • Frequency Response (+/-3dB)32Hz-25kHz
  • Power Handling: 250 Watts (continuous) / 1,000 Watts (peak)
  • Nominal Impedance: 8 Ohms
  • Sensitivity (2.83V/1M): 100dB
  • Dimensions (H x D x W): 1245mm x 454mm x 352mm, 49″ x 17.9″ x 13.9″
  • Weight: 44kg (97lbs)

Best Amplifiers to pair with Klipsch RF-7 III

McIntosh amplifiers have always been well-match with Klipsch speakers, the multi-award-winning McIntosh MA252 is a phenomenal hybrid amplifier for your Klipsch RF-7 III speakers. The McIntosh MA252 has the best of both worlds, using a vacuum tube preamp and solid-state power amplifier, providing a warm and sweet sound quality with more than enough power to drive the RF-7 III speakers. The musicality of the MA252 is truly exceptional and if you are critical about your music listening experience, then you definitely need to check this hybrid amplifier out.

If tubes are not your style then the Parasound Halo Hint 6 will be the next best amplifier to drive your Klipsch RF-7 III. The high bias class A/AB operation of the Hint 6 integrated amplifier will provide high-quality power with low distortion for that clean and smooth sound reproduction. The fuller and warm sonic characteristics of the Parasound amplifier will help ease the harshness when playing at loud volumes. This amp has more than enough power and currents to really drive your Klipsch RF-7 III to reference level volume. The HT bypass input is very useful for integrating the Hint 6 amp into your current home theater system.

More Information at Amazon – Parasound HINT 6 Halo

What better way to fully make use of the Klipsch RF-7 III speaker efficiency than matching them with a pure Class A amplifier like the Sugden Audio A21SE. It is a premium quality integrated amplifier that is very suitably matched with the sonic characteristics of the RF-7 III speakers, providing impeccable control over the music delivery and with clean-sounding clarity. The sonic purity and the dynamic balance are truly exceptional, the Sugden Audio A21SE complements the Klipsch RF-7 III speakers really well. It is a must listen and is worth your time to audition them together with your Klipsch speakers.

The Yamaha Audio A-S2200 is one of the best amplifiers you can match with your Klipsch RF-7 III. The transparent and neutral sound quality of the integrated amp is a good match with Klipsch speakers especially for listeners who like a lively sounding system. The Yamaha Audio A-S2200 is insightful and produces a faithful music presentation that is tonally balanced. A-S2200 is capable of creating a holographic soundstage that is accurate and highly defined, a musical amp with plenty of details. It is recommended to have an audition with them first before making a decision.

More Information at Amazon – Yamaha Audio A-S2200

If you are looking for a modern digital amplifier, the NAD M10 will be a terrific choice for you. The M10 can easily drive your Klipsch RF-7 III and with the IHF dynamic power, it can handle most music peaks. This BluOS Streaming amplifier is packed with features such as built-in 32-bit/384kHz ESS Sabre DAC, two-way Bluetooth with aptX HD, dual-band Wi-Fi, or wired Ethernet for high-quality music streaming via your home network, subwoofer output, and many more. The sonic characteristics of the Klipsch RF-7 III play well together, by providing top-notch clarity when presenting the music. Not to mention, the pleasing sound quality of the NAD M10 doesn’t make the overall sound reproduction overly bright.

NAD also makes AV receivers such as T 777 V3 and are well-received by critics. Denon and Marantz are more well-known for their AVRs when compared to NAD though. Furthermore, both brands use Audyssey which is one of the best room correction technology in the world and can calibrate your Klipsch RF-7 III speakers to sound better in your listening room. Denon and Marantz’s latest AV receivers are able to process 8K Ultra HD which is the pinnacle of home cinema visuals. The Denon AVR-X6700H is one such AV receiver that is able to process 8K/60Hz, and 4K/120Hz pass-through, furthermore, it has high amplification power at its disposal to drive your Klipsch RF-7 III with ease.

More Details at Amazon – NAD T 777 v3 Surround Receiver

More Info at Amazon – Denon AVR-X6700H 8K Ultra HD 11.2 Channel AV Receiver

To Sum It Up

You can choose the above-listed amplifiers or AV receivers based on your main requirements, for instance, if watching movies is your main entertainment then you should go for AV receivers. If music listening is critical and you want more warmth and fuller sound quality, then you should go for McIntosh MA252. You can also go by your budget as well. Once you have shortlisted the amplifiers/AV receivers, you should audition them using your Klipsch RF-7 III as the main speakers. After hearing them out, and you like what you hear, then more than likely that will be the amplifier for you.

Related Posts