The Wharfedale Diamond 12.2 is the type of speaker that you would want if you don’t wish to spend too much on one. Even though it is modestly priced, the Wharfedale Diamond 12.2 doesn’t compromise sound quality and is well-received by critics.
Now the question is do you need to spend a lot on an amp in order to drive the Wharfedale Diamond 12.2 speakers? We are going to find out by first learning more about the strengths and sound characteristics of these wonderful bookshelf speakers.
Table of Contents
Strengths and Sound Characteristics of Wharfedale Diamond 12.2
As mentioned earlier, the Wharfedale Diamond 12.2 is a bookshelf speaker model with a 6.5″ bass driver and a 1″ textile dome tweeter. For a standmounter, the Diamond 12.2 can reach rather deep into the bass extension, 43Hz (-6dB) to be exact. The frequency response is 50Hz-20kHz at +/-3dB. Wharfedale Diamond 12.2’s nominal impedance is 8 Ohms and the recommended amplifier power is 20W to 120W. Along with a sensitivity spec of 88dB, all these show the Diamond 12.2s are not difficult to drive.
There is ample weight in its bass delivery which is good for a bookshelf speaker model. If you want the low-frequency reproduction to be more pronounced, you can always place them nearer to the walls as they have a rear bass port. The size of the soundstage is decent and not the largest among the bookshelf speakers within this price range. Stereo imaging is accurate for the money and it has precision, you might want to use an amp that could expand the soundstage a little.
The Wharfedale Diamond 12.2 speakers are ideal for music listening but it is not as warm as the previous versions. You can still push them without worrying they will sound overly bright and piercing, allowing you to enjoy your music for hours without fear of listener fatigue. They seem to be a bit more agile which does help to add more excitement when listening to faster-paced music. The music delivery is smooth and detailed.
For a speaker of this price and prestige, it is pretty difficult to nitpick the Wharfedale Diamond 12.2. Of course, they are certainly not the very best speakers on the market but they are not far from them, not to mention, the Diamond 12.2s are more affordable. We will be showing you a list of the best amps to go for and match with your Wharfedale Diamond 12.2 bookshelf speakers. Do take your time to take a look at them.
The Best Amplifiers for your Wharfedale Diamond 12.2
The Rega Brio is one of the best amps to match your Wharfedale Diamond 12.2. It has sufficient amplifier power to drive the 12.2 standmounters. More importantly, makes them more agile and dynamic, adding excitement when listening to your favorite music. The Rega Brio has amazing control over the music delivery, not showing congestion when the going gets tough. Partly thanks to the warmth of the Wharfedale Diamond 12.2, the overall sound reproduction doesn’t sound too lean and bright.
The Cambridge Audio CXA61 is another award-winning amplifier that can drive the Wharfedale Diamond 12.2 speakers. It has an amazing balance, able to attack hard when the music calls for and doesn’t go overboard. This makes the CXA61 a versatile amp and suitable for most music genres. It also helps improve the stereo imaging of the Wharfedale Diamond 12.2 bookshelf speakers. The bass performance of the Cambridge Audio CXA61 amp goes well with the Wharfedale speakers too and the delivery is tight.
The Marantz PM6007 is not the most powerful stereo amplifier on this list but with 45 Watts per channel into 8 Ohms, it is still good enough to drive your Wharfedale Diamond 12.2. This is an ideal amp for listeners who prefer smooth and warm sonic characteristics. The PM6007 will help make your music listening session a more relaxing experience. The Marantz amplifier is not slow and has plenty of punch when it is called for. It has a reasonable price tag and definitely worth your time to audition Marantz PM6007 together with your Wharfedale Diamond 12.2.
If you want a swiss army knife of an amp without breaking your wallet. The Denon PMA-600NE will be an excellent choice for you. This is a highly-rated integrated amplifier with a plethora of features that you will find useful. It has a built-in DAC, Phono pre-amp, and more. With the PMA-600NE, you can now enjoy listening to analog and digital music without switching amps. It is capable of driving the Wharfedale Diamond 12.2 speakers and you can choose to connect to an active subwoofer if you want higher bass output.
The Audiolab 6000A is one of the best amplifiers to match your Wharfedale Diamond 12.2 speakers. It is capable of driving your Diamond 12.2s and slightly expands the soundstage. Making your music delivery sound spacious without compromising precision. It also adds more details and clarity to the music presentation. The overall sound reproduction is clean and the Wharfedale Diamond 12.2 speakers will help to smoothen the edges a little. This amp sounds great at high-volume levels but please try not to push it too hard.
For listeners who are facing space constraints, you might want to check out the NAD D3020 V2. This is a very compact integrated amplifier and you can easily fit it inside any room. The ultra-low profile cabinet also makes it an exceptional choice for a desktop sound system, and you can place the amp in an upright position. It just has enough amplifier power to drive the Wharfedale Diamond 12.2 speakers and we suggest getting yourself an active subwoofer. For a small amp, the NAD D3020 V2 can deliver quite a full-bodied music presentation.
The Wharfedale Diamond 12.2 are terrific speakers with a modest price tag and the amps listed here will go well with them. You will still need to audition them together so as to make sure the sound quality and characteristics are what you want to hear. For listeners who are planning to integrate a subwoofer, do include the sub during the audition if possible.