Amplifier for Wharfedale Diamond 12.3

Amplifier for Wharfedale Diamond 12.3

The Wharfedale Diamond 12.3 is a pair of award-winning floor-standing speakers that are very well-received by critics. They are also highly regarded by fans and this comes as no surprise since the 12.3s are from the popular Diamond series made by Wharfedale. If you don’t have a high budget to purchase floor-standers, you might want to take the Wharfedale Diamond 12.3 into consideration.

If you are already a proud owner of the Wharfedale Diamond 12.3 speakers and are currently looking for a matching amplifier, then please continue to read on. We will be listing out the best amplifiers to go with the Wharfedale Diamond 12.3 floor-standing speakers after we have learned more about them.

The Strengths of Wharfedale Diamond 12.3

The Wharfedale Diamond 12.3 is one of the less demanding floor-standing speakers you can get your hands on. This means you don’t need to look for a really high-powered amplifier to drive the Diamond 12.3s. Their recommended amplifier power is between 30 Watts to 150 Watts and the nominal impedance is only 8 Ohms. This spec alone leaves us plenty of amplifier choices to go for and we still need to filter the list further.

The Wharfedale Diamond 12.3 can reach down to 45Hz bass extension (+/-3dB) which is impressive for a floor-standing speaker of this size. You wouldn’t want to choose an amp without sufficient power to make them sing, not to mention, it takes substantial amplifier power to produce deep bass frequencies. As they are rear-ported, you can place the Wharfedale Diamond 12.3 speakers nearer to the rear wall so as to make their bass reproductions more pronounced.

More Details of Wharfedale Diamond 12.3 floor-standing speakers at Amazon UK

With proper speaker placement and enough room for the Wharfedale Diamond 12.3 to breathe, the bass performance is tighter than expected and non-excessive. It is not those slow and bloated low-end reproductions you will get from low-quality floor-standing speakers. The Wharfedale Diamond 12.3 is agile and the low-ends pace well with its higher registers. It can pack a punch when the music calls for it, especially when played at higher volume levels.

The midrange reproduction is the best aspect of the Wharfedale Diamond 12.3 loudspeakers, and it sounds amazing. With their overall sonic performance and at this price point, there is little to complain about these floor-standers. They are smooth, musical, and easy to listen to. The Wharfedale Diamond 12.3 don’t sound as warm when compared to the previous iterations. We have prepared a list of the best amplifiers to go with your Wharfedale Diamond 12.3 floor-standing speakers, do take some time to have a look at them below.

The Best Amplifiers for Wharfedale Diamond 12.3

The Cambridge Audio CXA81 is an award-winning integrated stereo amplifier and it is certainly a worthy match for your Wharfedale Diamond 12.3 speakers. CXA81 not only has the amplifier power to drive the Diamond 12.3s but also the enthusiasm to make your speakers sound more lively. Not only the Wharfedale Diamond 12.3 sounds slightly more dynamic, but the excellent music timing of the Cambridge Audio CXA81 will ensure the presentation doesn’t go off the script. The bass performance sounds punchier too.

More Information about the Cambridge Audio CXA81 amplifier at Amazon

The Marantz PM8006 is one of the best amplifiers to go with your Wharfedale Diamond 12.3 especially if you want to add more warmth to the overall sound reproduction. If you only or mainly use the Diamond 12.3 floor-standers for music playbacks, the PM8006 integrated amplifier should definitely be on your list of considerations. When it comes to vinyl playbacks, the Marantz PM8006 sounds a bit fuller and the mids are slightly warmer as well. The Marantz amplifier also has enough power to drive the Diamond 12.3 speakers.

More Information about the Marantz PM8006 amplifier at Amazon

For Wharfedale Diamond 12.3 owners who are more concerned about power and/or are planning to drive their speakers at high volume levels. Perhaps you should check out the Peachtree Audio Nova150. It has an output power per channel of up to 150 Watts into 8 Ohms and can efficiently drive the Wharfedale Diamond 12.3 floor-standers without breaking a sweat. The preamp of the Nova150 adds smoothness and warmth to the music without compromising accuracy.

More Details of Peachtree Audio Nova150 integrated amplifier at Amazon

If you prefer to listen to music wirelessly, the Denon PMA-900HNE will be an ideal choice for you. Firstly, the Denon PMA-900HNE is capable of driving the Wharfedale Diamond 12.3 speakers and it is modestly priced. The PMA-900HNE integrated amplifier has plenty of wireless streaming features such as Bluetooth, AirPlay 2, etc. The built-in HEOS feature would be great for Diamond 12.3 speaker owners who have other compatible speakers/devices to connect to at home currently. There is MC and MM Phono Equalizer as well.

More Details of Denon PMA-900HNE at Amazon

Wharfedale Diamond 12.3 owners who mainly use their floor-standing speakers for watching movies, might want to consider getting an AVR. The Denon AVR-X4800H will be one of the best choices to go for and it has enough amplifier power to drive your Diamond 12.3 speakers. It is an 8K UHD AV receiver with the latest audio formats, providing you with an immersive home theater experience. We suggest connecting active subwoofers if you are planning to blast the volume up, let the subs take some of the burdens of producing subterranean bass.

More Details of Denon AVR-X4800H at Amazon

The Marantz Cinema 50 is another AV receiver with sufficient amplifier power to drive your Wharfedale Diamond 12.3 speakers. This is an excellent choice for listeners who use their sound system for both movies and music playbacks. Like the Denon AVR-X4800H, the Marantz Cinema 50 has 8K/60Hz passthrough and delivers amazing 3D audio presentations. When it comes to music delivery, the Cinema 50 AVR is one of the best within its price range. You will need to hear it for yourself though.

More Information about the Marantz Cinema 50 at Amazon

To Sum It Up

We highly suggest you shortlist one or more amplifiers from this list and arrange an audition with them. This will allow you to identify which amplifier sounds the best to you when matched with your Wharfedale Diamond 12.3 floor-standing speakers. You can also filter the list based on your usage. For instance, if you are using the Diamond 12.3 speakers mainly for home theater use then you might want to just check out the listed AV receivers.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *