The KEF Q300 are bookshelf speakers and you would think that they will do great on a shelf but it is actually one of the worst places to put them on. Placing the Q300 stand-mounters in an almost enclosed area with the back reinforcing the bass output will affect the overall balance of the sound quality. They may have front-firing bass ports but you will still need sufficient space between the back wall/surface and the speaker itself. If not it may increase the bass output and causing the low frequencies to muddle the midrange reproduction.
Placing the KEF Q300 speakers on a TV cabinet/table will not be ideal as the desktop surface at the front of the speaker will cause reflection, negatively impacting the speakers’ sound quality. You can try to place them nearer to the edge of the desktop but still may not have enough distance in between the speakers and the rear wall thus affecting the tonal balance. TV cabinets, PC desktops, and other furniture that are been used as makeshift speaker stands for the KEF Q300 are usually not wide or deep enough, not to mention, lack of flexibility for speaker positioning.
More Details at Amazon – KEF Q300 Bookshelf Speakers (Pair)
To really bring the best performance out of the KEF Q300 speakers, you will certainly need a good pair of speaker stands to hold them firmly in place. With speaker stands, you will be able to spread the speakers apart which the recommended distance is around 9ft ( between 2.5m-3.0m). The KEF Q300 speakers will then be able to project a wide soundstage in which they are capable of and provide excellent stereo separation with nice spacing. You can also position them away from the walls, usually around 3ft (around 1 meter) or more. You will need to experiment with this yourself and to see which distance provides the best overall balance for you. The side walls will also affect the sound quality so do adjust accordingly. You might also want to adjust the toe-in position of your Q300 speakers so that the speaker drivers are pointed towards your ears. Elevating the tweeter to your ear levels is crucial too. Do note that the KEF Q300 uses a Uni-Q driver array and the 1″ (25mm) aluminum dome tweeter is located at the center of the 6.5″ (165mm) aluminum mid/woofer driver.
As you can see, just the speaker placements and positionings alone will affect the sound quality of your KEF Q300 speakers, not to mention, the walls and surfaces will influence the overall sound reproduction as well. The Q300 stand-mounters are energetic performers and will provide you with an engaging music presentation so don’t let these acoustic issues ruin your music listening experience. We will be preparing a list of the best speaker stands which you can go for. Before we start sharing, let’s find out more about your speaker stand requirements as this will also influence the type of speaker stands you should get.
Table of Contents
KEF Q300 Speaker Stand Requirements
First and foremost, allocating a comfortable budget is important as not only it opens up the choices of speaker stands which you can go for but also finding out you might need to get some other audio components. Are you using the KEF Q300 as desktop speakers or maybe having an issue with space constraints so you could only place them on a desk. Then you probably should go for desktop speaker stands instead of the standard ones. Do you need the speaker stands to fit nicely with your wood theme home interiors, if yes going for wooden speaker stands might do the trick but may not be optimized for your KEF Q300 so you need to weigh the importance of aesthetics over sound quality.
Will you be integrating an active subwoofer into your surround sound system and will you be setting the KEF Q300 as small speakers. If the subwoofer is taking over most of the bass reproduction that means you can place the speakers nearer to walls. As for this case, you can also wall-mount the KEF Q300 instead of using speaker stands since they use front-firing bass ports. You should only wall mount the Q300 if you are using the stand-mounters as surround speakers or running out of floor space for them. Do you need to adjust the height of the speakers from time to time? If you say yes then probably going for speakers stands with an adjustable height feature will be a great idea.
These are but some of the usual requirements you might want to know and check through. There are also other speaker stand requirements such as cable management, color options, spouse approval, etc. You should add your own requirements to the list and run through it thoroughly. Once you are sure of what type of speaker stands you’ll need then please check out the list of the best speaker stands for the KEF Q300 stand-mounters.
Best Speaker Stands for KEF Q300
The KEF S2 Floor Stands will be one of the best speaker stands for your KEF Q300 bookshelf speakers. The S2 Floor Stands are specially made for KEF LS50 Meta and other KEF bookshelf speakers. The width and the depth of KEF Q300 are really close to the LS50 Meta measurements, be it just a tad bigger. There are 5 beautiful color finishes to choose from that will suit your KEF Q300 speaker color scheme. The KEF S2 speaker stands are integrated with a cable management system and have spike discs to protect your wooden floors. Acoustically and aesthetically, the KEF S2 Floor Stands will be an exemplary match for the KEF Q300s.
More Details at Amazon – KEF S2 Speaker Stands
The SANUS NF30 will be one of the best speaker stands for the KEF Q300 especially if you are looking for a wood theme design. The NF30 has a solid hardwood pillar that supports a 6″ by 6″ top plate with up to 3 color options to choose from. The neoprene pads will help to provide superior isolation as well as resonance damping for your KEF Q300 speakers so to maintain high sound quality. There is also speaker wire management where it will hide the cables and protect them at the same time. It is a modestly priced speaker stand and will look great in a listening room with wooden interiors.
More Details at Amazon – Sanus Systems NF30 Speaker Stand
The KEF Custom Single Post speaker stand will be another ideal choice for your KEF Q300 speakers. As firstly, it is specially designed for a range of KEF stand-mounters including the Q series. It is also built to allow the KEF speaker stands’ central column to be filled with inert filler which the KEF GFS Stand inert filler will be a good choice to go for. The KEF Custom Single Post speaker stand only has 2 color finishes though and doesn’t look as aesthetically pleasing as the KEF S2 but it is more modestly priced. There are adjustable spike feet and you can get KEF’s floor protector discs so to protect your hardwood floor.
More Details at Amazon – KEF Custom Single Post Speaker Stands
If you are looking for adjustable speaker stands, the Vantage Point adjustable bookshelf series SSB-30BB is an excellent choice to go for and partner with the KEF Q300. The Vantage Point SSB-30BB can accommodate speakers of up to 25 pounds and you can adjust the height from 24″ to 30″ which should be sufficient enough. It recommends filling the central column with sand. The Vantage Point SSB-30BB speaker stands visual design should fit in nicely into most listening rooms. At this price point, we really have nothing to complain about the Vantage Point SSB-30BB.
More Details at Amazon – Vantage Point SSB-30BB Adjustable Bookshelf Speaker Stands
For desktop users, you might want to check out Sound Addicted SMPad 8 which are studio monitor isolation pads used by professionals. The SMPad 8 can hold up to 44lbs which is more than enough to hold the KEF Q300 speakers without changing the foam shape. It will decouple the Q300 bookshelf speakers from the desktop or furniture they are sitting on thus improving the overall sound quality. Another usage of the Sound Addicted SMPad 8 will be adjusting the KEF Q300 stand-mounters angle so to direct the sound to your ears. It will be great for nearfield listening and it is affordably priced too.
More Details at Amazon – Sound Addicted Studio Monitor Isolation Pads | SMPad 8
The Rockville RHT8G will be another ideal desktop speaker stands for you to check out. It is really sturdy as it could hold up to 66 lbs of weight and has a very modest price tag. The visual aesthetics may not be everyone’s cup of tea but if functionality is what you are looking for then the Rockville RHT8G will do just fine for your KEF Q300 speakers. The SANUS SF26 is a pair of heavy-duty speaker stands suitable for stand-mounters that weigh up to 35lbs. Aesthetically, the SF26 speaker stands look stylish and modern which makes it look quite matching with the KEF Q300 bookshelf speakers.
More Details at Amazon – Rockville Desktop Speaker Stands (RHT8G)
More Details at Amazon – Sanus SF26 Speaker Stands
To Conclude
These are some of the finest speaker stands to partner with your KEF Q300 stand-mounters. We will suggest checking them out physically and see if you like the overall design. You can also use this opportunity to talk to their support and get more information about the speaker stand which you are most interested in. If you want to look for more speaker stand options then do remember that the KEF Q300 bookshelf speakers are bulky and heavy, it is wise to get high-quality speaker stands with high ratings.
